Power of Model-B is a nine-volt alkaline battery, the battery is located at the bottom of the device. Push the slide switch to the left so that the location is connected to activate the Model-B, slide switch is located behind the Model-B red board. Model-B through the sliding back of the button, and assigned to the left or the right to determine the pattern you need: gold or silver. You can see there is a code word with DISC from 1-10 black knob, the knob is the tuning knob. By adjusting the tuning knob, instrument can also change the settings to your best. Front-end devices have three antennas. 2 for a short distance outside antenna, the center antenna can be used to adjust the maximum distance and distance.
Model-B users can search for outdoor B0 ~ 250 feet of the coins in 1000 feet in size and scope of the larger items. Can search more than 9 meters depth of the larger items. Greater depth a deeper exploration of objects. This equipment can be used in prospecting. By virtue of this instrument, you can set up in some regions dredging machines, washing trough or gold plate test; the equipment can save time and may increase the chance of access to gold. Regulators can also help get the gold ground. Coin search is another viable option.
Basic search technology
The use of Model-B pre -
1) Slide switch, activate the apparatus.
2) tuning knob to adjust the best equipment. (May take some time to do on the device ID in order to find the best location of the resonance frequency)
3) an outdoor target placed in front of you on the ground or buried in a gold and silver you want to detect the target sample, and then stand away from the target B-foot outside.
4) The center out of three antennas, antenna away side.
5) Select Settings button: gold or silver
6) in order to reduce the height of apparatus equipment in the location of zero point to the bottom, the arms stretch along the side of the body.
7) enhance the regulator to prepare a comfortable position, usually on your left side of the test target 45 degrees.
Search technology to scan
The beginning of scan, in a straight line before you move in front of regulators to search for the region. Remember moving 45 degrees from the regulator to the left of the target practice, the target should be away from the location of your B standing feet away. When smooth mobile devices, will produce the best results. Remember, if the target object has been buried a few days, a stronger ability to detect.
1. In accordance with the above instructions before operating equipment preparations.
2. To enhance the height of equipment to prepare the location.
3. Stretch your arms to a comfortable position, arms and legs slightly bent, elbows slightly bent, close to the side of the body. Try to use your upper arm and lower arm form a right angle.
4. In a straight line in front of your body to smooth the way for mobile devices.
5. If you use the right hand, left the mobile device to a target from the practice about the location of the number of 45 degrees. And then shifted to right back to the regulator to the right target in the practice of 45 degrees.
6.
7. To wait for equipment to determine the target. Target practice before the repeat scan two or three. If you detect the effective regulator should point to your test or its target to attract.
8. In order for your confidence and put up a probe to determine if the test target on the ground from both sides are about 3 to 6 feet, you can move the test objectives and observed by the test equipment is still the goal of attracting.
If the scope of the test did not point to the target, down equipment to the user side cleared. Scanning again.
If you do not feel the scan attractive, the need for observing the following aspects:
1. You will be placed on equipment directly in front of you, there is no sudden tilt to the left or right? Skills means that a proper balance Electroscope operator can do this simple test, if more difficult to balance, there is a small skill, a downward bias to the ground antenna Electroscope about five times to help balance and scanning process.
2. Tuner knob to adjust to a different figure. If not received in the position to detect an object, you can position 2 or 3 or any other location received.
3. Hard pressed regulator button on the battery to access the location of detection, the tuning knob to nine. Instrument should be transferred to 0. If not, replace the nine-volt alkaline battery.
We describe the resistance to torque or the attractiveness of the antennas point to System-to maintain power at the time of exercise objectives. This attraction between the magnet can be compared to the feeling of passing time, or cutting machine in the direction of the region feel the gravitational drag on the lines.